NEWS
What should be paid attention to when using electric tools
Release time：
2021-11-12
Before using the tool, a full-time electrician should check whether the wiring is correct to prevent accidents caused by misconnection of the zero line and the phase line.
1. Before using the tool, a full-time electrician should check whether the wiring is correct to prevent accidents caused by misconnection of the zero line and the phase line.
2. Before using tools that have been left unused or damp for a long time, an electrician should measure whether the insulation resistance meets the requirements.
3. The flexible cable or flexible wire that comes with the tool must not be extended. When the distance between the power supply and the workplace is far away, a mobile electric box should be used to solve the problem.
4. The original plug of the tool shall not be removed or replaced at will, and it is strictly forbidden to directly insert the metal wire of the wire into the socket without the plug.
5. If the shell and handle of the tool are found to be broken, stop using it and replace it.
6. Non-professional personnel are not allowed to disassemble and repair tools without authorization.
7. The rotating parts of the tool should have protective devices.
8. Operators should wear insulating and protective equipment as required.
9. A leakage protector must be installed at the power supply.
